RCBS

The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body, innovative 3-jaw chuck that firmly grips the case rim. Just tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet.

The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body, innovative 3-jaw chuck that firmly grips the case rim. Just tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet.

RCBS Cowboy shell holders provides a firm grip on the case to insure trouble-free reloading. Holds the case in proper alignment while the case is being run into the die

RCBS Cowboy shell holders provides a firm grip on the case to insure trouble-free reloading. Holds the case in proper alignment while the case is being run into the die

• Set of 60.5 grains for powder charges
• 2x20, 1x10, 1x5, 2x2, 1x1, 1x.5

Measures case neck concentricity, case neck thickness, case length and bullet run-out.Detects case head separation before symptoms are apparent on the outside of the case.

• Bullet trajectories can be created from a database of 2,069 component bullets, plus a catalog of over 2,360 factory loads.
• Electronic versions of the Speer Reloading Manual #14 and the RCBS Cast Bullet Manual are included.
• Contains an index of data sources showing where to find loads for over 760 standard Wildcat cartridges.
• Contains a Cartridge Designer that allows you to start with a parent cartridge, the program then allows you to change the dimensions and see the case capacity for your new Wildcat recalculate automatically.
• Other reference included are: Ballistic Coefficient Calculator, Kinetic Energy Calculator, Minimum Twist Rate Chart, Pressure Assignments List, Metric Equivalents Chart, Powder Burning Rate Chart, and a database of dimensional drawings for 517 cartridges.

• 486DX 100 Mhz processor
• 16 MB Ram
• 8 MB of hard drive space (15 MB if all optional libraries are purchased and installed.)

• Bullet trajectories can be created from a database of 2,069 component bullets, plus a catalog of over 2,360 factory loads.
• Electronic versions of the Speer Reloading Manual #14 and the RCBS Cast Bullet Manual are included.
• Contains an index of data sources showing where to find loads for over 760 standard Wildcat cartridges.
• Contains a Cartridge Designer that allows you to start with a parent cartridge, the program then allows you to change the dimensions and see the case capacity for your new Wildcat recalculate automatically.
• Other reference included are: Ballistic Coefficient Calculator, Kinetic Energy Calculator, Minimum Twist Rate Chart, Pressure Assignments List, Metric Equivalents Chart, Powder Burning Rate Chart, and a database of dimensional drawings for 517 cartridges.

RCBS® dry media can be used in both Sidewinder and Vibratory case cleaners.

The RCBS Primer turning tray is designed to fit the shape of today's larger primer package quantities.

RCBS announces the introduction of the Rock Chucker Supreme Auto Priming Unit. This conversion will allow the users of the current single-stage model to advance to a tube-fed auto-priming system, eliminating the need to handle primers and boasting a 100-primer capacity. Press not included

RCBS announces the introduction of the Rock Chucker Supreme Auto Priming Unit. This conversion will allow the users of the current single-stage model to advance to a tube-fed auto-priming system, eliminating the need to handle primers and boasting a 100-primer capacity. Press not included

These steel constructed locking rings allow the reloader to set up dies and lock them in place so they can be removed and replaced without having to recalibrate. Fits on standard 7/8"-14 threaded dies.

These steel constructed locking rings allow the reloader to set up dies and lock them in place so they can be removed and replaced without having to recalibrate. Fits on standard 7/8"-14 threaded dies.

• 4 3/4" Operating Window
• 6-Station Interchangeable Turret Head
• One-Bolt Turret Head Removal & Replacement
• Priming Station
• Spent Primer Catcher
• May be operated in progressive or single-stage mode; in progressive mode, output can be increased from 50 to 200 rounds per hour
• Rugged, cast iron frame, toggle block and turret head
• Turret Pin Assembly and Ball Handle Assembly may be positioned for right- or left-hand use
• Primer Plugs and Sleeves are supplied for seating large and small primers
• Safety tube included

• 4 3/4" Operating Window
• 6-Station Interchangeable Turret Head
• One-Bolt Turret Head Removal & Replacement
• Priming Station
• Spent Primer Catcher
• May be operated in progressive or single-stage mode; in progressive mode, output can be increased from 50 to 200 rounds per hour
• Rugged, cast iron frame, toggle block and turret head
• Turret Pin Assembly and Ball Handle Assembly may be positioned for right- or left-hand use
• Primer Plugs and Sleeves are supplied for seating large and small primers
• Safety tube included

Primer pocket uniformers are designed to ensure that primer pockets are cut to the correct SAAMI depth specifications, cleaning out built up carbon residue from previous firings and squaring the bottom of the primer pocket with respect to the case head.

Primer pocket uniformers are designed to ensure that primer pockets are cut to the correct SAAMI depth specifications, cleaning out built up carbon residue from previous firings and squaring the bottom of the primer pocket with respect to the case head.

The RCBS Primer Pocket Brush is a great tool reloaders can use to remove the residue from primer pockets making them cleaner.

The RCBS Primer Pocket Brush is a great tool reloaders can use to remove the residue from primer pockets making them cleaner.

• Designed with a taper to guide pilot into the case mouth
• Prevents case from wobbling when trimming case to length

The case trimmer pilots designed with a taper to guide pilot into the case mouth and guides cutting blades to prevent deformation.  

• RCBS Neck Sizer Only.
• .223 Rem.

RCBS CAse Cleaning Media can be used in any vibratory tumbler or in the RCBS Sidewinder rotary case tumbler. Formual 1 is walnut hull ground to 12-12 Sieve size for fast cleaning of dirty cases.

• Hardened stainless steel construction.
• Includes a chart with maximum and trim-to case lengths included.
• Features a fitted hard plastic storage case.

• The new benchmark of single stage presses.
• Has everything you need to start reloading like a pro. Except dies and shell holders.
• Items included are also sold seperately.

• Easy way to fix mistakes.
• An improved 3-jaw chuck firmly grips the case rim.
• Guaranteed for life.

Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length

Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length

Convert the Uniflow Powder Measure (not included) for use on most four or five-station progressive presses. The Uniflow Powder Measure can have the regular Measuring Screw or the optional Micrometer Adjustment Screw installed, depending on your preference.

RCBS® polishing compound comes individually packed (5-packs) so reloaders can choose various amounts of media to mix.

RCBS® polishing compound comes individually packed (5-packs) so reloaders can choose various amounts of media to mix.

• Ambidextrous handle placement.
• O frame design.
• Positive spent primer retention.
• Compound leverage.
• Cast iron construction.

• Quickly secures locking rings on RCBS dies.
• Replace inconvenient adjustable wrenches.
• The handle pivots for leverage from any angle.

• Instant readings in inches or millimeters.
• Jaw depth measures 1-1/2" outside, 5/8" inside.
• Includes a 1.55-volt silver oxide battery and storage case.

• Case prep and presses to powders and primers.
• You’ll see how easy and fun it is to load your own ammunition.
• Getting a look at the latest equipment from RCBS.

• Can record precise settings for your powder charges.
• Determine the load number and dial it in, time after time.
• Easy installation. It simply replaces the Uniflow's standard metering screw.

• Fold up set.
• Includes eight heat-treated hex keys.
• Hex keys fit most RCBS hex head screws.

• Resizes case necks.
• Resizes to exacting dimensions.
• End result is perfect, no fail bullet seating.