Dies-and-Presses

Lee Load-Master progressive 5-hole reloading kit for 223 Rem. Includes press, full length sizing die, short charging die, Easy Adjust Dead Length bullet seating die, and quick trim die for perfect primer alignment, turret, 4s shell plate, Auto-Drum Powder Measure, Rifle Charging Die, Rifle Case Feeder and small primer feed.

Load-Master shown mounted to the Lee Reloading Stand, sold separately.

WARNING: Only CCI or Remington brand primers are safe use with this press. If you plan on using any brand besides CCI and Remington, you must install the included explosion shield.

Trim to length 1.680 to 1.700 inches.

Lee Pro1000 progressive 3-Hole reloading Kit for 223 Rem. Includes press, PaceSetter 2-die set (Full Length Sizer, Bullet Seater/Crimper), 3-hole turret, 4 Shell Plate, Auto-Drum Powder Measure, Short Charging Die, Rifle Case Feeder and Small Priming system.

This press only accepts the 3-Hole Turret.

Pro1000 pictured mounted to the Lee reloading stand, sold separately.

WARNING: Only CCI or Remington brand primers are safe

This press only accepts the 3-Hole Turret.

Lee 40 S&W Pistol 4-Die Set. Includes Carbide Full Length Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Note: can be used to load the 10mm Auto. Back out the bullet seating die and powder through expanding die 1 3/4 turns. 10mm Load Data is found in "Modern Reloading"

Lee Large series (1 1/4x12 thread) 50 BMG Factory Crimp Die, used with the Classic Cast Press only, crimps the bullet in place more firmly than any other tool.

Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

The rugged Turret Press along with the Auto Drum Powder Measure, produce top quality handgun ammo in a hurry. A finished round with a few pulls of the lever. Large enough to handle monster belted magnum rifle cases. When it is time to change calibers, simply lock in a new turret and begin loading within seconds. In addition to the Turret Press and Auto Drum Powder Measure; the kit includes the Lee Safety Scale, unmatched for sensitivity, a primer pocket cleaner, cutter and lock stud to trim the cases and a chamfer tool to deburr cases after trimming.

For handgun reloaders, a set of Lee Dies is all that is required to complete this reloading outfit. All this at a price that will allow you to pay for your investment in a matter of hours. This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time.

For rifle reloaders, the maximum cartridge length that can be reloaded on this press is 2.3125 inches. Any cartridge longer than this you will have to dis-engage the auto index and manually turn the turret by hand. In addition, you will need to purchase a rifle charging die, and appropriate case length gauge to trim your brass after sizing.

Please note: the Turret press pictured is mounted on the Lee Bench Plate, this is sold as an accessory.

Lee Pro 1000 progressive 3-hole reloading kit for 38 Special. Includes press, dies (full length size, powder through expanding and bullet seating dies), 3-hole turret, 1 shell plate, Pro Auto-Disk powder measure, large case feeder and priming system.

This press only accepts the 3 hole turret.

Pro 1000 pictured mounted to the Lee Reloading Stand, sold separately.

WARNING: Only CCI or Remington brand primers are safe use with this press.

Lee Load-Master progressive 5-hole reloading kit for 38 Special (can also load 357 Mag). Includes dies (full length size, powder through expanding and bullet seating dies), turret, shell plate, powder measure, case feeder and primer feed.

Load-Master shown mounted to the Lee Reloading Stand, sold separately.

WARNING: Only CCI or Remington brand primers are safe use with this press. If you plan on using any brand besides CCI and Remington, you must install the included explosion shield.

Lee 223 Seating Die Only

Lee 223 Seating Die Only

Lee 30/06 Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data

Lee 25/06 Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data

Lee 30/06 Really Great Buy. Includes Full Length Sizer Die and Easy Adjust Dead Length Bullet Seating Die (no crimp).

Lee 222 REM Really Great Buy. Includes Full Length Sizer Die and Easy Adjust Dead Length Bullet Seating Die (no crimp)

Lee 375 H&H Pacesetter 3-Die Set includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data

Lee 270 WINCHESTER Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Lee 30/06 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Lee 25/06 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.

Lee 17 Hornet PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee 308 Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. This die can also be used for the 303 Savage.

Lee 260 Rem PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee 220 Swift PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Large series (1 1/4x12 thread) collet necksizing 2-die set for 50 BMG, used with the Classic Cast Press only. Includes Collet Neck Sizing Die, Bullet Seating Die, and Instructions.

Does not include shell holder or powder dipper.

Lee 30/06 Collet Die only. Sizes just the neck and needs no lubrication

Lee 222 Remington Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data

Lee 45/70 Steel 3-Die Set. Includes Full Length Sizing Die, Bullet Seating Die and Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data

Lee 22 Hornet Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data.