Blaser

• Material: Carbon (robust and light)
• Adjustable length from 0.9 meters to 1.85 meters
• Ideal for stalking, mountain hunting and driven hunt
• The Carbon Stick can be easily clamped to the shooting stick thanks to the stirrup lock.

• Material: Carbon (robust and light)
• Adjustable length from 0.9 meters to 1.85 meters
• Ideal for stalking, mountain hunting and driven hunt
• The Carbon Stick can be easily clamped to the shooting stick thanks to the stirrup lock.

• Material: Carbon (robust and light)
• Weight: 985 grams
• adjustable length from 1.24 meters to 1.98 meters
• delivery includes bag
• low-noise foam grips and rubber base pieces
• ideal for stalking, mountain hunting and driven hunt

• Material: Carbon (robust and light)
• Weight: 985 grams
• adjustable length from 1.24 meters to 1.98 meters
• delivery includes bag
• low-noise foam grips and rubber base pieces
• ideal for stalking, mountain hunting and driven hunt

Shooting Stick Spare Front Yoke

• 3L Pants made from exclusively developed japanese fabric for high performance hunting delivering 100% alpine weather protection with minimal noise emission.
• Fully seam taped.
• Mechanical stretch fabric for full freedom of movement.
• Perfect balance of lightweight durability.
• 3/4 side water repellent zipper for easy and quick on and off and that doubles as a upper leg vent.

My Shell is my Shelter.  3L Pants equipped for full alpine severe weather protection with high performance comfort. 

• Recoil proof and guaranteed to return to zero after reattachment
• All heat treated steel base and lock, lasting deep blued
• Enhances sighting and long range precision shooting
• Precision crafted in the European Union
• Compatible with all guns with Blaser saddle mount system

Blaser's Saddle mount, robust and reliable, offers a 100 % repeatability, meaning that it can be removed and put back onto the rifle without having to re-zero. It can withstand the recoil of all the calibers, even the most powerful ones. To indicate that they are original, all the new mounts made by Blaser have 'Blaser' engraved into the steel at the bottom part of the mount.

The bases of the Blaser's Saddle mounts are made from steel while the rings are made from aluminum. To mount it on the rifle, the user has to follow a very specific mounting procedure. First, the Saddle mount with the locking levers open has to be placed into the four notches on the barrel of the Blaser rifle. Once on, the levers have to be folded inwards to fix the mount in place. With a standard precision screwdriver, the clamping force has to be adjusted (it is important to use a precision screwdriver since the bigger ones can leave scratches on the surface). Unlike other similar mounts, the Saddle mount does not feature locking screws which is pretty unusual. Once the clamping force is adjusted, the screws will remain in that position. Blaser Saddle mounts are very compact and of an elegant shape.

It is important to note that once a Blaser mount is mounted on the rifle, it cannot be used on any other Blaser rifle as it will either clamp with too much force or it will be too loose (there is a possibility that the mount will fit on another rifle but that seldom happens).

As regards the BH height, there is only one model to choose from – the model with 9.7 mm BH height. All rail mounts (ZM/VM, SR, Convex) designed for Blaser rifles sit very low on the rifle, lower than rail mounts made for other rifles. The combination of the Blaser rifle and the Saddle mount looks very elegant as a result (the riflescope comes mounted very low). Mounting a riflescope is much easier with the rail mount than it is with a ring mount – when the user mounts a riflescope with a rail underneath, the riflescope and the rifle's barrel are in the same plane immediately, no further adjustments are required. The mounting with a rail is far more robust and reliable than mounting with rings. Furthermore, the riflescope is subject to less tension.

• Rifle sling made of leather and Cordura
• Soft, wide shoulder pad for maximum comfort
• Non-slip, elasticated and length adjustable
• Integrated cartridge case for two ball cartridges
• Detachable swivel rings with quick release fastener

• 100% cotton
• Classic baseball cap design
• Blaser branding on the front

• 100% cotton
• Classic baseball cap design
• Blaser branding on the front

• 100% cotton
• Classic baseball cap design
• Retro Blaser branding on the front

• 100% cotton
• Classic baseball cap design
• Retro Blaser branding on the front